90-150KN Rated Load 25-50mm Conductor Diameter Conductor Gripper Come Along Clamp with 150N.m Tightening Torque

Multi Segment Conductor Gripper for Large Cross Section Conductors

A large cross section conductor under high tension needs more than a single jaw: the clamp has to spread its grip along the conductor so the strands are not crushed at one point. This multi segment gripper uses 9, 11, 13 or 15 segments to distribute clamping force over a longer length.

Design Features and Field Benefits

• Segmented Clamp Spreads the Load: Nine to fifteen segments share the clamping force along the conductor, which avoids the local crushing and strand deformation that a short jaw can produce.
• Rated 90KN to 150KN: The two models cover high tension and large span stringing, where the pull force per conductor is well above distribution levels.
• 150N.m Tightening Torque: A defined torque gives a repeatable, verifiable grip, so the supervisor can confirm the clamp is correctly tightened before the pull starts.
• OEM and ISO 9001 Production: Project specific marking and configurations can be produced under an ISO 9001 quality system, with inspection records available.

Multi segment gripper models

Dimensions and ratings are nominal. Confirm the exact model against the datasheet before ordering.

Product Overview

The segmented design follows the conductor surface and loads each segment, which keeps contact pressure even and reduces the risk of strand damage. Two models cover conductors up to 35mm and 50mm, with rated loads of 120KN and 150KN and a tightening torque of 150N.m. Production runs under ISO 9001, and OEM configurations are available for project specific requirements.

Typical Applications

• Large cross section conductor stringing
• Large span transmission line construction
• Conductor tensioning and sag adjustment
• Heavy duty overhead line work

Selection Guidance

• Specify the conductor diameter when ordering; the clamp is fitted to the conductor size.
• Use a calibrated torque wrench to reach 150N.m and record the value.
• Inspect segments and bolts before each high tension pull.

Quality Control and Delivery

Units are assembled in an ISO 9001 certified workshop. Frames are checked for sheave alignment and axle straightness, load bearing parts are inspected before assembly, and finished units are function checked before packing. Export packing is a plywood case with a moisture barrier, and a 12 month warranty covers manufacturing defects. Inspection records and, on request, third party load test certificates can be supplied with the shipment.

Frequently Asked Questions

For project specific configurations, drawings or inspection requirements, send the conductor size, rated load and destination port with your enquiry.