Parallel Earth Wire Gripper Come Along Clamp with Simultaneous Twin Wire Grip 13-26mm Max Open 10-30KN Rated Load

Parallel Earth Wire Gripper for Twin Ground Wire Tensioning

Two parallel ground wires have to be tensioned to the same value, and doing them one at a time makes that hard to achieve. This gripper clamps both wires in one tool, so a single adjustment tensions them together and keeps the pair even.

Product Overview

The body is compact and the two clamping positions are arranged in parallel, which keeps both wires at the same height during tensioning. Three models cover GJ16-70 through GJ150-300 with max openings from 13mm to 26mm, and each unit is load tested before it leaves the workshop.

Design Features and Field Benefits

• Twin Wire Grip in One Tool: Both ground wires are clamped and tensioned together, so the pair stays even and the job needs one operator instead of two.
• Covers GJ16 to GJ300: Three models with 13mm to 26mm openings match the steel strand sizes used on most transmission earth wire configurations.
• Light Enough for Work at Height: At 1.2-3.8KG the gripper is easy to handle on a tower and quick to move between anchor points.
• Load Tested Before Delivery: Every unit is tested before packing, and the test is recorded so the supervisor can verify the clamp before use.

Parallel earth wire gripper models

Dimensions and ratings are nominal. Confirm the exact model against the datasheet before ordering.

Selection Guidance

• Match the model to the strand size and confirm the rated load against the tensioning force.
• Check the max open dimension against the actual strand diameter before ordering.
• Inspect the grip faces for wear after each project.

Typical Applications

• Parallel earth wire tensioning
• Twin ground wire stringing
• Ground wire sag adjustment
• Overhead line construction and maintenance

Frequently Asked Questions

Quality Control and Delivery

Units are assembled in an ISO 9001 certified workshop. Frames are checked for sheave alignment and axle straightness, load bearing parts are inspected before assembly, and finished units are function checked before packing. Export packing is a plywood case with a moisture barrier, and a 12 month warranty covers manufacturing defects. Inspection records and, on request, third party load test certificates can be supplied with the shipment.

For project specific configurations, drawings or inspection requirements, send the conductor size, rated load and destination port with your enquiry.