10-30KN Rated Load Forged Alloy Steel Wire Rope Gripper Come Along Clamp for 4-32mm Wire Diameter Rope Pulling

Universal Wire Rope Gripper Come Along Clamp

A universal gripper earns its place in the tool bag when it can handle whatever rope is on site. This forged clamp covers 4mm to 32mm wire rope across three models, with a heat treated anti-tension rack that holds the rope without sliding.

Design Features and Field Benefits

• Forged and Heat Treated Body: Forging produces a denser grain structure than casting, and heat treatment adds hardness where the rack and body take load.
• Anti-Tension Rack Holds Without Sliding: The rack geometry increases bite as tension rises, keeping the rope locked during pulling rather than relying on friction alone.
• Three Models Cover 4-32mm: One product family handles wire rope from light lashing through to 32mm pulling rope, reducing the number of clamps a crew carries.
• Light Enough for Hand Work: At 1.3-2.8KG the gripper is easy to handle at height and quick to move between anchor points.

Universal gripper models

Dimensions and ratings are nominal. Confirm the exact model against the datasheet before ordering.

Product Overview

The body is forged and heat treated rather than cast, which gives a denser structure and better resistance to deformation under load. The rack teeth are shaped to bite along the rope, and the compact 1.3-2.8KG weight means it can be carried and repositioned by hand during pulling and rigging work.

Typical Applications

• Wire rope tensioning and pulling
• Conductor and cable stringing
• Rigging, hoisting and lifting
• Temporary rope anchoring

Selection Guidance

• Match the model to the rope diameter first, then confirm the rated load against the pull.
• Inspect rack teeth before each use and replace the gripper if teeth are rounded.
• Use on clean rope; grit and mud reduce grip and accelerate wear.

Quality Control and Delivery

Units are assembled in an ISO 9001 certified workshop. Frames are checked for sheave alignment and axle straightness, load bearing parts are inspected before assembly, and finished units are function checked before packing. Export packing is a plywood case with a moisture barrier, and a 12 month warranty covers manufacturing defects. Inspection records and, on request, third party load test certificates can be supplied with the shipment.

Frequently Asked Questions

For project specific configurations, drawings or inspection requirements, send the conductor size, rated load and destination port with your enquiry.