MC Nylon Bullwheel 2X55 / 1X100 Transmission Line Stringing Equipment Cable Puller Tensioner
The overhead transmission line tension stringing equipments are widely used in overhead transmission Line Conductor or OPGW tension stringing project. We are the only one to supply whole set of stringing equipment and tools for transmission line construction in China.
We could supply whole set of stringing equipment and tools for transmission line up to 1000KV construction.
- Essential parameter
||2×55 or 1×110
||2×50 or 1×100
|Maximum speed (km/h)
|Bull wheel bottom of groove diameter(mm)
|Number of grooves:
|Maximum pull-back (kN)
||2×50 or 1×100
|Maximum pull-back speed(km/h)
|Maximum suitable conductor diameter (mm)
|Engine power /speed (kW/rpm)
||Beinei Deutz air cooled diesel engine
|Main Hydraulic Valve
a. They are widely used for stringing the conductors & cables(OPGW,ADSS,500kv tractiong rope,LGJ series,etc.).
b. This machine has a set of tension early warning system,which can automatically adjust the speed according to the undue load or friction produced on the line and can keep the tension at setting value.
c. Tension or pulling force can be preset,spring applied brake,reliable overhead protection mechanism,easy to operate.
30KN Hydraulic wire tension device adequate to tension releasing various conducts and earthwires .and also useful for tension releasing OPGW optic cable compounded earthwire and ADSS self–stand optic cable etc .
Bullwheel with wearproof MC nylon lining segments.
infinitely variable tension control and constant tension conductor stringing .
spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety
attached hydraulic power output interface to connect hydraulic reel stand .
Engine : Cummines water-cooled engine .
Main pump/motor :Rexroth (BOSCH)
Reducer :RR(Italian )
Hydraulic valve:Rexroth (BOSCH)